TP-Link N600 VDSL/ADSL - Modem Set Up Guide (FTTN)

Here’s how to set up your TP-Link N600 VDSL/ADSL Modem/Router for Fibre to the Node/Basement (FTTN/B) NBN on the Pentanet network. Let’s go!

(Note: if you’re connected to a different service type, please click here)

1. Plug in the power adaptor and power on the device.

2. Use the supplied ethernet cable to connect a computer to one of the yellow LAN ports. You can also connect wirelessly, however we recommend ethernet connection.

3. Open a web browser and type http://192.168.1.1 into the address bar. Log in with the username admin and the password admin.

4. Click Network and select WAN Settings from the left hand menu.

5. Click Add.

6. Use the guide below to complete the set up.

• VLAN ID is an optional field and should be left empty unless otherwise indicated in your Pentanet welcome email.
• Your PPP Username and Password - this is your Pentanet authentication username and password, which you can find in your Pentanet welcome email. You can also find it in your customer portal if lost or forgotten.

8. Click Save.

And that’s it!

You can now enjoy your superfast Pentanet internet connection to stream, browse, and game online.

Note: The TP-Link N600 has two Wi-Fi networks which broadcast on different frequencies - 2.4GHz and 5GHz. 5GHz can reach faster speeds, but doesn’t penetrate walls well. 2.4GHz travels farther, but often won’t be as fast. We recommend using the 5GHz network when you’re nearby the unit, or the 2.4GHz if you’re in a different room or further away.

Pssst… your customer portal awaits! Don’t forget to login to your customer portal to check your data usage, find your latest bills, grab your referral code to earn a $50 gift card… and more!