How Do I Access a NetComm Router's UPnP Settings?

Image

  1. Ensure the device you are using is set to automatically assigned IP address
  2. Either cable in to the router via network cable or log into the router’s WiFi
  3. In the device’s web browser, navigate to ‘192.168.20.1
  4. Enter ‘admin’ as both the username and password to log into the router’s GUI
  5. In the GUI menu, navigate to: Advanced Setup > UPnP
  6. Check or uncheck the ‘Enable UPnP’ checkbox
  7. Click ‘Apply/Save
  8. Exit the router’s GUI
Was this FAQ helpful?
FAQ details:
Published date: 26/07/2018
Last updated: 27/07/2018 (Troy)
^ Top of Page